Go to http://192.168.1.1 .It will ask for username and password.Give it as below.
username --admin
password --admin
The following page will open.
Click on interface setup.The following page will open.
The modem works in two mode
1-Bridging
2-PPPoE
For Bridge configuration simply select Bridge mode option and save.
For PPPoE configuration select PPPoA/PPPoE and feed the username and password given by BSNL.
Tick the NAT and Default route to enable both the options.
Save the setting.
WLAN (Wireless) setting
Go to wireless option under Interface setting.The following screen will open.
- Tick on activated to enable wlan.
- You may change the SSID to your personal/company name.
- Select WPA-PSK/WPA2-PSK in Authentication type.
- Give the security key (minimum 8 character) in pre shared key option.
- save the setting.